SLE1 & ZSLE1

Cellulose and Synthetic Filter Elements for Zinga SLF1 Tank-Top Filters


Zinga cellulose and synthetic filter elements keep fluids clean and are in available in a variety of different options. Zinga filter elements protect your system from dirt and debris by removing them from liquids immediately.

Features

  • Cellulose and Z-Glass Media 
  • 1/2” & 3/4” NPTF; SAE-8 & SAE-12 ports 
  • 1.8″ OD x 7.9″ L 
  • Buna-N Seals 
  • Built In By-Pass Valve 
  • FOR USE WITH SLF1 SERIES TANK-TOP FILTERS

Benefits

  • Easy to install and use
  • Removes dirt and debris from liquids
  • keeps fluids and system clean

Specifications and Dimensions

CodeMedia TypeNominal RatingAbsolute Rating
SLE103Celluloseß<4μ(c) = 2ß11μ(c) = 75
SLE110Celluloseß<5μ(c) = 2ß19μ(c) = 75
SLE125Celluloseß<19μ(c) = 2ß36μ(c) = 75
ZSLE103Z-Glassß<4μ(c) = 2ß4μ(c) = 75
ZSLE110Z-Glassß<4μ(c) = 2ß10μ(c) = 75

Performance Charts

Average pressure drop through clean assembly with 150 SUS oil at 105° F

Zinga Filter Media Types

Z-Glass Media

Multi-Layered, non-woven glass media that provides the highest levels of depth filtration efficiency and capacity. Higher capacity means longer service life. Coupled with a steel support mesh, Z-Glass can withstand higher differential pressures.

Cellulose Media

Traditional paper based media that provides a nominal level of depth filtration and capacity. Used with petroleum-based fluids only. Some grades of cellulose include a layered glass fiber substrate to provide more efficiency.

AquaZorb Media

Water absorbing cellulose based media designed specifically to absorb and retain free water from petroleum-based fluids. Commonly used in offline systems, AquaZorb will operate until it is fully saturated and ultimately curtail flow through the media. A system by-pass valve and service gauge is recommended when using AquaZorb.

Stainless Steel Mesh

Woven in a variety of precision patterns, stainless steel mesh provides a basic surface type filtration with very low differential pressure. Applications include pump protection and “last chance” valve protection. Stainless steel mesh can be serviced by ultrasonic cleaning. (30: 560µ, 60: 280µ, 100: 141µ, 200:75µ, 200×1400: 10µ)

Compatible Tank-Top Mounted Filters

SLF1 Series Tank-Top Filters (with Integral Tank Breather)

Flows Up To: 25 GPM (Return)

Port Sizes: 1/2″ & 3/4″ NPTF, SAE & BSP

Pressure: 100 PSI Max. Operating Pressure; 300 PSI Burst

Temperature: -15 to +230°F Operating