RE & ZRE Series

Filter Elements for Zinga RF, WF, and TR Tank-Top Filters

Zinga filter elements keep fluids clean and are in available in a variety of different options. Zinga filter elements protect your system from dirt and debris by removing them from liquids immediately.


  • Cellulose, SS Mesh, Aqua-Zorb & Z-Glass
  • 3, 10, 25 & 141 Micron
  • 3.91″ OD x 1.96″ ID
  • 9” & 18” Nominal Lengths
  • Buna-N or Fluorocarbon Seals
  • For use with RF, WF and TR Series Tank-Top Filters


  • Easy to install and use
  • Removes dirt and debris from liquids
  • keeps fluids and system clean

Specifications and Dimensions

Use in RF, WF & TR Housings

Part NumberNominal RatingAbsolute RatingMedia Type(A) ID(B) LengthFlow Direction Through Element
RE40903ß<4µ(c) = 2ß11µ(c) = 75Cellulose1.61″9.19″Bi-Directional
RE40903AZ**ß<4µ(c) = 2ß11µ(c)/ = 75Aqua-Zorb1.61″9.19″Outside to Inside
RE40910ß5µ(c) = 2ß19µ(c) = 75Cellulose1.61″9.19″Bi-Directional
RE40910AZ**ß5µ(c) = 2ß19µ(c) = 75Aqua-Zorb1.61″9.19″Outside to Inside
RE40925ß19µ(c) = 2ß36µ(c) = 75Cellulose1.61″9.19″Bi-Directional
RE41803ß5µ(c) = 2ß11µ(c) = 75Cellulose1.61″18.19″Bi-Directional
RE41810ß5µ(c) = 2ß19µ(c) = 75Cellulose1.61″18.19″Bi-Directional
RE41825ß19µ(c) = 2ß36µ(c) = 75Cellulose1.61″18.19″Bi-Directional
RE409100*141 Micron————-SS Mesh1.61″9.19″Outside to Inside
RE409100R*141 Micron————-SS Mesh1.61″9.19″Inside to Outside
RE409100M*141 Micron————-SS Mesh1.61″9.19″Outside to Inside
RE409100MR*141 Micron————-SS Mesh1.61″9.19″Inside to Outside
ZRE40903ß<4µ(c) = 2ß7µ(c) = 1000Z-Glass1.61”9.19”Outside to Inside
ZRE40903Rß<4µ(c) = 2ß7µ(c) = 1000Z-Glass1.61”9.19”Inside to Outside
ZRE40910ß<4µ(c) = 2ß12µ(c) = 1000Z-Glass1.61”9.19”Outside to Inside
ZRE40910Rß<4µ(c) = 2ß12µ(c) = 1000Z-Glass1.61”9.19”Inside to Outside
ZRE41803ß<4µ(c) = 2ß7µ(c) = 1000Z-Glass1.61”18.19”Outside to Inside
ZRE41803Rß<4µ(c) = 2ß7µ(c) = 1000Z-Glass1.61”18.19”Inside to Outside
ZRE41810ß<4µ(c) = 2ß12µ(c) = 1000Z-Glass1.61”18.19”Outside to Inside
ZRE41810Rß<4µ(c) = 2ß12µ(c) = 1000Z-Glass1.61”18.19”Inside to Outside


  1. *100 mesh stainless steel wire cloth standard for 141 micron elements. 30, 60, and 200 mesh optional.
  2. ** Aqua-Zorb filter media retains up to 11 oz. of free water. Any absorbed water cannot be liberated from the media. As the element becomes saturated with water, the Aqua-Zorb media continues to swell, and will ultimately curtail flow through the filter. Not for use with water-glycols.
  3. RE and ZRE are equipped with a Buna-N grommet (radial) seal as standard. (Fluorocarbon Available)

Performance Charts

Average Pressure Drop Through Clean Filter Assembly With 150 SUS Oil At 105 ̊ F

Zinga Filter Media Types

Z-Glass Media

Multi-Layered, non-woven glass media that provides the highest levels of depth filtration efficiency and capacity. Higher capacity means longer service life. Coupled with a steel support mesh, Z-Glass can withstand higher differential pressures.

Cellulose Media

Traditional paper based media that provides a nominal level of depth filtration and capacity. Used with petroleum-based fluids only. Some grades of cellulose include a layered glass fiber substrate to provide more efficiency.

AquaZorb Media

Water absorbing cellulose based media designed specifically to absorb and retain free water from petroleum-based fluids. Commonly used in offline systems, AquaZorb will operate until it is fully saturated and ultimately curtail flow through the media. A system by-pass valve and service gauge is recommended when using AquaZorb.

Stainless Steel Mesh

Woven in a variety of precision patterns, stainless steel mesh provides a basic surface type filtration with very low differential pressure. Applications include pump protection and “last chance” valve protection. Stainless steel mesh can be serviced by ultrasonic cleaning. (30: 560µ, 60: 280µ, 100: 141µ, 200:75µ, 200×1400: 10µ)

Compatible Tank-Top Mounted Filters

RF Series (100 PSI) and WF Series (500 PSI) Tank-Top Filters

Flows Up To: 96 GPM (Return) 32 GPM (Suction)

Port Sizes: 1 1/4″ & 1 1/2″ NPTF, 1 5/8″ – 12 (SAE – 20), 1 7/8″ – 12 (SAE – 24), 1″ & 1 1/4″ BSP

Max. Operating Pressure: RF – 100 PSI, WF – 500 PSI

Temperature: Up to 250°F Operating

WF-2 Series Tank-Top Filter

Flows Up To: 300 GPM (Return) 100 GPM (Suction)

Port Sizes: 2″ NPTF, 2″ 4-Bolt Flange, 2 1/2″ 4-Bolt Flange, 3″ 4-Bolt Flange

Pressure: 300 PSI Max. Operating Pressure

Temperature: Up to 250°F

TR & TS Series Suction / Return Line Tank-Top Filters

Flows Up To: TR 96 GPM (Return) 32 GPM (Suction)

TS 71 GPM (Return) 24 GPM (Suction)

Port Sizes: 1 1/4″ & 1 1/2″ NPTF, 1 5/8″ – 12 UN (SAE – 20), 1 7/8″ – 12 UN (SAE – 24), 1 1/4″ BSP

Pressure: 100 PSI Max. Operating

Temperature: Up to +250°F